"Over $16 Billion
dollars of Electricity is
unusable energy, but
billable in the U.S."
-U.S. Dept. Of Energy
"The Adequacy of
North America's
electricity system will
decline unless changes
are made soon...
demand for electricity is
expected to increase
over the next ten years
by 19 percent in the
U.S., but confirmed
power capacity will
increase by only 6
percent."
-North American
Electric Reliability
Council (NERC)

A KVAR Energy Controller is an electromagnetic control system that reduces the
amount of non-productive current in your existing electrical system. It helps to
significantly reduce electrical costs and pollution from energy generated by the utility
companies.
KVAR EC will reduce demand at the meter by reducing lost and wasted power, plus it will
reduce maintenance costs and increase equipment life by reducing heat around the
motor and wiring caused by reactive current.
Why is energy efficiency so important? Up to 25% of the billable electricity consumed in
homes and businesses is non-productive and unusable.
Most AC motors operate at 80% efficiency or less under a full load…the efficiency drops
dramatically at lower loads. This non-productive energy wastes money and also
shortens the life of inductive equipment such as motors, HVAC equipment, pumps and
major appliances.
How does KVAR help our energy shortages? KVAR EC fine tunes electrical systems to
reduce non-productive and wasted electricity giving you cost-effective energy!
How does KVAR work?
• KVAR has patented an apparatus and methodology for determining, to an exact
science the amount of capacitance that is needed to optimize inductive motors to unity
for maximum savings.
• KVAR fine tunes the electrical system from the inductive equipment back through
the utility company’s KVA meter, kilowatt hour meter (kWh) or demand meter. This fine
tuning slows down the operation and therefore reduces electrical consumption.
• The KVAR EC stores the reactive power to create the electromagnetic field (EMF)
around the inductive windings of a motor.
• As motors operate, reactive power is “pulled” and “pushed” to and from the KVAR
EC by the motor at 60 cycles per second.
• The KVAR EC stores and releases what the motors need to function more
efficiently.
• This unique approach serves to reduce the heat generated on the lines and
therefore also reduces the strain placed on all the electrical components.
• Electricity, which would normally be pushed back through the power distribution
lines, is reclaimed and recycled by the KVAR EC.
• The KVAR EC reclaims, stores, recycles and supplies power to all inductive loads.
“Energy Saving Solutions for the Future” KVAR Energy Controller (EC) Commercial – Industrial – Residential Reducing electrical waste and energy costs!
|
Installation is quick and the savings immediate
EC panel mounted system is attached to the top breaker on a 100, 200 or 400 amp
single or three phase service panel. By installing KVAR EC in this location, you are
optimizing both sides of the busbar in your panel and insuring whole facility surge
protection. KVAR EC panel system can be installed outdoors or indoors, at the main
breaker panel or a sub-panel.
For larger three phase motors, the preferred location of KVAR EC is at the motors’
disconnect, which are installed after trained electricians have performed an individual
sizing of the respective motors. This creates the largest savings and quickest return on
investment. (ROI)
Note: Qualified electricians should perform all work.
Businesses can now dramatically reduce the cost of determining how much capacitance
is required to optimize each inductive load at their facility. The patented KVAR
apparatus and methodology achieves this by eliminating the typical electrical
engineering, design and manufacturing costs. This precision technology fine tunes
each motor to unity for immediate savings with a quick ROI. Installation is fast, simple
and sized to the specific unit.
Energy Savers International (www.EnergySaversInternational.com) is currently looking
for more representatives to promote the KVAR Energy Saver. Call 850-206-6855 for
more details.
KVAR EC Advantages
• Return on investment is rapid
• Power savings are immediate and average from 8% up to 25%
• 10% Savings guaranteed
• Reduces power surges and increases motor and appliance life
• $500 in tax credits available ($300 in 2009 and $200 in 2010)
• Reduces the harmful effects from electromagnetic fields
• 12 year warranty – home unit & 5 year warranty – business/industrial
• 25 year life expectancy
• U.S. Patented, Cleaner & Greener Certified plus RoHS Certified
Just $399 for residential KVAR EC